Max5 9006 Led Headlight Bulbs 9006 Led Conversion Kit 10000LM 6500K Bright Led Bulbs

Bought a pair of H3 LED headlight bulbs with 2 year warranty from this seller. One of the bulbs gave out before the 2 years were up, I tried messaging them but get no response. Junk bulbs with a junk warranty! Beware!EDIT: 2/6/23 After I left this review the seller contacted me and offered to send a replacement. So I waited over a month but no replacement came! I contacted them once more, this time they responded immediately and said they would send them again.... Several days later Amazon delivered them! So in the end they did stand good for their warranty after all!!

** UPDATE **I guess I should have waited until I was able to drive at night with these, as real world light out on the road differs quite a bit when comparing with the beam pattern against an aiming wall.Sadly my enthusiasm diminished greatly after driving at night, because there is a significant dark spot on the road right in the middle of the beam area.I would have to attribute this to the fact that the chips-while placed properly and with the deflector underneath to direct the light as it should like stated elsewhere in the review-there is no light in the UPPER CENTER directed back similar to what occurs with the standard H4 Halogen bulb using a filament with the reflector underneath.Maybe these would work OK on a lamp unit that is not as precise as the Cibie E-Code lens, but it becomes a very glaring design oversight in these lamps and sadly I will be taking them out and going back to the standard halogen bulb. I added a photo of a standard halogen bulb setup so that you can compare and see how the filament is positioned but also has a full length reflector underneath to direct light completely across the headlamp reflector and not just from the two sides as these LED units do.** Original Review **Installed these into my Cibie E-Code headlamps and was pleasantly surprised as the design has the chips in the correct position to produce the correct beam pattern in the fluting of the lamp unit.I have tried several other LED "H4" units but none of them had chips positioned correctly so they produced a lot of unfocused glare, because with these lamps the optics are so precise for the pattern the illumination must be in the exact proper position for the beam pattern to be correct.These bulbs appear to be made with the chips exactly in the same position as the filiment on a standard halogen H4 bulb, including the curved reflector to direct the light up and back against the reflector in the housing, which then focuses the light to the fluting pattern for the beam pattern to be as the lamp designers intended.The only reason for not giving an overall five star rating is the moisture seal does not fit onto the back of the lamp housing, and I fear that moisture will get into the lamp and cause the reflector to deteriorate.

I just got these today and put them in. They are defiantly plug and play. Very easy AFTER you are able to get to the light bulbs. My 2018 Chevy Cruze did not make it easy to get to them. After that, I was able to just unplug the halogen bulbs and plug in these LED'S. And because of the way they are made I didn't have to buy a after market dust cover to fit around the other bulky fans on most LED'S. I don't know why the other LED'S don't make them with smaller fans like these. I hope that don't make these not as safe. I was warned by Chevy they don't recommend using after market or led bulbs so I hope there will be no problems later. As for the light.. WOW!!! what a difference. It makes no sense that ALL car manufacturers don't put the best lights in the cars when they build them for safety. The 9005 Halogen bulbs with factory projection headlights that is in my car was the worst bulbs ever. The first time I drove at night with rain I at 50 was scared to drive for the very first time, because I could not see anything as close as right in front of my car. It's pretty bad when you cant see the lines in the road. I will post more in a few days after I really drive at night and during the day after really running these LED'S and am able to really give you a in site on how bright and to make sure I don't see any problems with them. As of right now, I am very happy. I wish that everyone can see the gold color of these all the time. They are pretty cool looking, but it will always be covered up with not only the dust cover, but the hood of course.UPDATE: So I have had these for a while now and I am very happy that I got them. So far I have not had any problems with them. They are very bright but so far has not had anyone flick their bright lights on me thinking I had mine on. They spread out wide to see both lines on the street. My lights take the 9005 bulbs and these fit with no problems and I didn't have to buy a new dust cover to fit behind the fans on this bulb and that was a big plus.