Winn Dri-Tac Midsize +116-Inch Grip Kit (13-Piece)

These grips have a nice texture, not sticky feeling but still grippy. The kit came with the adhesive tape already cut to length and the adhesive solvent. Everything with replacement worked perfect. There was a rubber clamp to put around the shaft and I stuck that in a bench vise to hold the club steady during replacement and that was really helpful. Watch a couple YouTube videos to get the process down and you’ll find it pretty easy. Hardest part is getting the old grips off.

If you're wondering if you can do this yourself, you can! Seriously. It's not hard. First, about the product:Winn grip feel never disappoints. I have larger than normal hands (e.g. XL gloves) and find the midsize to be very comfortable. I've used oversize and normal in the past; midsize is my new favorite. Durability not an issue yet after 5 rounds, but I anticipate trouble with these breaking down after a year like several other reviewers around the web have noted. An idea to consider: if you're just replacing a couple grips, purchase this whole set and save the remainder. I purchased this kit just to replace the grips on my woods, so I have many left over that I plan to use next year, should the 3 I've installed so far break down.Install tips:- take off old grip with box cutter or other blade. Scrape off old tape- put new tape down, with 1/2" excess hanging over the butt end of the shaft. This tape won't be the length of your grip; that's okay. Only 1 layer of tape is needed on standard diameter shafts- push the excess tape into the butt of the shaft, essentially closing it off- use PLENTY of solvent. Don't skimp. Grab the new grip, plug the bottom whole of the grip with a finger, and pour a bit of solvent in it; shake it around. Then drench the tape on the shaft.- Then, slide the grip on quickly, pushing hard in the direction of the head. It should go on smooth assuming you used enough solvent. That's it.I didn't use enough solvent at first and the grip got stuck half-way down. I had to cut off that grip. I used more the remaining times and had no trouble. Good luck!

Kit worked very well, solvent and tape system was easy to use. I wear an X-LARGE glove and the + 1/6” grips feel perfect

These are great grips in terms of feel and use. The only downside is you need to be prepared to change them out about every 2-3 months as they wear quite easily. I play a moderate amount of golf (1-2x/week) and am changing these out as indicated. I continue to buy them despite the wearing issue as they do perform to my satisfaction.

Love these grips! These midsize grips are just slightly larger than the standard grip giving them a nice soft feel. When yo place your hands on the grip your hands will not move. As the kit, I am so glad I decided to regrip my clubs myself. Very easy to do, Most of the time spend was on removing the old tape while putting on the new grips only took a few minutes per club. As another reviewer states don't use the sprayer on the bottle, just remove and pour the liquid on the tape and inside the grip itself to coat the inside,just remember the wetter the better. Lastly, when putting the grip onto the shaft, slide it on as quickly as possible to eliminate the grip from sticking before it is completely on. If you have never regripped clubs before don't be afraid to try it.

Has everything you need to do a professional job. I absolutely love the way these feel. I feel I can play a round of golf without a glove with these grips. They're so tacky your able to lighten your grip.

First time installer, pretty easy, removal of old grips hardest part but with patience very manageable. Follow instructions

Great in wet weather. A little assistance from You Tube, but the regripping process was very easy.Will purchase again.