LOTOSPCS22 Plasma Cutter Consumables Sets for Brown Color LTP5800D LTP5000D and Brown Color LTPDC2000D (22 Pieces)

Good quality

I have used "MILLER" plasma cutter in the past and the consumables are $$$. I couldn't afford a "MILLER" plasma cutter and after some research decided to get a "LOTUS" cutter.The LOTUS cutter and consumables are well worth the price.

The set was a little pricey, so I gave it 4 stars, but the cutter is great and was a good deal. Balances out. Cheaper to buy the 77 piece set.

Exact replacement

Product is as stated

I purchased the 77 piece set because the smaller sets are just too expensive. I have always cut with acetylene/oxygen torch so this is my first time with a plasma torch. Consumables last longer as I learn to master the this process. Regarding the review with the cone that caught on fire, I don't know what that material is, mine are ceramic with pressed in brass threads. The brass threads are the only difference than the set that came on the machine. Have already made several cuts with new consumables and it cuts exactly the same as OEM. Ground is critical to the process. No plasma cutter will perform well with poor ground. I removed the cover on mine and removed the ground screw (which was not super tight), filed off the powder coat under it and reinstalled the ground screw very tight. I had about 30 feet of #2 ground cable lying around so I made a new ground cable the same length as the torch. I replaced the ground clamp with the HF 2nd tier ground clamp (actually a decent clamp). You must always check the connections throughout the ground before cutting and then once a year or so depending on how much you use it. The hardware on the HF clamp was loose on both sides. Basically, make a couple of small cuts, shut the machine off and feel all your ground connections for heat. If any of them are warm-hot, that is a poor connection and must be resolved.

I am not going lie, I was skeptical about ordering this. I blew a mother board in my other big name expensive Plazma cutter. Cost $800 for the board and no reason from manufacturer why it blew. So I ordered it, an extension cord, adapter plug to my 3 prong 220 and extra consumables. It arrived, unboxed it and started working. First cut was through 2 × 1/4 inch plates. Zero problems blew right through it. I have finished 2 jobs in the first 3 days of having it. I can say 100% happy. If your giving a bad review, you do not know how to use a plazma cutter. This little thing is unbelievable, I am using nothing but 220 volt. I didn't mention I fabricate and weld for a living.

ok

These are sold along side of the lotos ltp5500dcnc plasma cutter but they are not compatible with it. There do not appear to be any comparable consumables sold in Canada

did not fit my new cutter having problems sourcing correct consumables