✨ Light Up Your Ride with Style!
The GTINTHEBOX Led Circuit Board C-Rings are designed specifically for 2015-2018 Subaru WRX and STI models, featuring a dual-color setup with 480 high-performance LED diodes. These C-rings provide a striking xenon white halo for daytime running lights and an amber yellow blinker for turn signals. Installation requires modifications, making professional help advisable for optimal results.
Manufacturer | GTinthebox |
Brand | GTINTHEBOX |
Item Weight | 1 pounds |
Package Dimensions | 9.88 x 6.06 x 1.46 inches |
Manufacturer Part Number | GT-OE-002 |
Bulb Type | Led |
Special Features | 防水 |
Voltage | 12 Volts (DC) |
Wattage | 2 watts |
B**K
Works as Good as Other More Expensive Brands
Working for few weeks now and these works just as good as my Diode Dynamics version.I accidentally short circuit one of the diode dynamic C lights I had and did not want to spend too much more money. So, I replaced both with this new brand and hopefully, these will last for many years.The basic concept is good and if you think about it, these should NOT cost over $100 like the big brands try to sell. This version does not plastic cover all the LEDs like the big brands but really its not needed.Also, I want to say the big brands had option that dims the C light a little bit when the extra wire is hooked up to the headlight, etc. This brand does not have that option. But I don't think most people can tell the difference unless you live in a really dark area with no street lights.
B**M
Works, But some problems.
So for the short and sweet review: It works. The LED's are bright and look great! But there are some problems with the soldering on the back of the LEDs, problems with the turn light relays (they also don't look like they would keep water out) and the LED's are hard to fit under the bevel.Overall these work and look great. They are bright and visually make the car look way better. But I suspect there will be some problems in the future with the relays once it gets cold. (The turn signal won't work unless its warm out) Some things to keep in mind when doing this upgrade. If you want to use the Modules that came with this kit. You should wrap them well to keep moisture out. They don't look like they will keep water out. I can see gaps in the exit's for the cables. I would also take a look at the back of the LED's where the wires connect to make sure the soldering isn't just holding onto the wire with a few strands. Mine did, I had to resolder the wires on. Once I got the headlights out getting these to fit behind the bevel was a bit of a pain. They fit, But it was really hard. Be prepared to deal with trying to get the bevel to snap back in without breaking it. (TAKE YOUR TIME, The plaster can easily break) For the switchback relays they work. But I suspect they were made with really cheap capacitor's once the sun goes down and it gets to around 55F the turn signals won't work when locking and unlocking the car. (They do work once you have the DRL power going through them) So over all these are pretty good. But keep in mind you might have to do more then just install them. I would recommend maybe making your own switchback relay or getting the Diode dynamic's relay to replace them later.Wiring: this is pretty easy. All you need is 2 fuse taps, Wiring, 2 Diode rectifiers and 2 vampire taps. For making your own harness connect the 2 fuse taps with 2 Diode rectifiers then connect those together then send those wires to the red wiring coming out of the switch back. Connect the black wires to ground. (You can connect them together and ground them together to make it easier to ground and wire) Then for the turn signal connect about a foot and a half of wire to the turn signal yellow wire coming off of the switch back and vampire tap it into the hot wire going to the turn signal. Finally on the passenger side under the headlight you'll find the DRL relay (Its a metal box with fins) Unplug that to make it so your c-lights are your only lights running for your DRL's. One finally note make sure you seal all your wiring really well to protect against water. The areas these are installed in get a lot of water inside of it.
Y**A
Berry bright
The media could not be loaded. Way better than the factory t10 bulb plus it adds directionals
B**.
Doesn't fit the 2015 C light section
To wide at the bottom of the C light lense to rigid to fit inside the lense, no flex so can't fit contour of the light fixture.Lights are bright and function well but then won't fit in the lense
J**E
I need help with wiring
I installed them in the housing but I tried connecting the wire but they won’t light up. If anyone has any advice please let me know.
P**D
Super satisfied
I’ve order this product for modifying my 2008-2011 Impreza headlight and I’m honestly really satisfied about those. Even they’re made for 2015+ wrx I founded easy to adapt on my model. I’ve actually paint the housing black but super quality. Super customer service too. Recommend at 100% if you’re searching for a great add to your car.
Trustpilot
1 week ago
3 days ago