Real Avid Universal Glock Sight Pusher | Front and Rear Sight Tool for Glock 19, 17, 43, 26, 22, 48 & More | Pistol Sight Pusher Tool for Adjusting Dovetail Sights on Most Sight Styles

Very intuitive and simple tool to use. Easy to change or adjust rear sights. Front sight tool can also be used to remove pins from the frame for ease of disassembly if installing trigger upgrades or whatnot. Great value for money.

I’ve tried several different types of sight tools for my Glocks. Some worked OK, others didn’t. This one is great. Easy to use and holds the slide in place with no issues. Highly recommend.

I have a glock 19 gen 5 with a rear sight that had drifted over time out of alignment, hadn't really noticed because of using the holosun optical but when I did notice it I wanted it back into alignment, may need it if the optical ever failed. I looked at several sight pushers because I prefer something less risky then banging the rear sight with a punch and hammer, I was looking at some videos of sight pushers and stumbled on the real avid sight pusher and decided to give this one a try on a hunch and I am so glad that I did because this compact tool worked right out the box! even better is that I didn't have too remove my optical (eps full size) and the pusher is compact enough to take with you to your range if need be, all in all follow the simple directions and you can go wrong or damage your slide!

All my handguns are Glock. I bought this sight pusher to use on my Glock. Upon opening it and trying to get it set up correctly, it took me about 5 minutes to figure it out. The direction sucks and did not mention any of this. AS I try to lock my slide into place, I notice that my slide sits too high and the pusher is hitting the slide.I spent a few minutes trying to adjust it down but it did not make any difference. After looking at the sight pusher, I notice there are 3 plates on the bottom, 1 is black and the other 2 are silver. If your slide sits too high, you have to remove the silver plate. I removed 1 of the silver plates and my slide was still sitting too high so I had to remove both of the silver plate and kept the black plate on there in order for my slide to finally sit in correctly.Using the sight pusher to push out the rear sight was very easy. It was putting the new rear sight back on that will require you to use some power. All in all, it worked for what I needed it for but I don't know if it's worth the price. It's almost $100 for this, when you can just use a rubber mallet for $10 on here and will do the job better. So to make this short, this sight pusher works but I would rather use a rubber mallet instead. It's cheaper and so much easier to use.Update 2025: after owning this product for close to a year and getting familiar with it. I wanted to update my previous review on this product. This sight pusher is actually the best one out there! Easy to use and putting on the rear sight is a cake walk. I highly recommend this sight pusher.

Overall I really like this product and it's a good buy. If I can offer 2 suggestions to improve the product....First, I'd like to have a non-marring tip on the adjustment tooth so as to avoid banging up sights. I did get some scuffing on my Ameriglo UC rear sight, but I'm honestly not upset as I will be using that particular gun alot and it will get some wear anyways, but if I were maybe setting up a nice "show piece" (yes, even Glocks can be made to look very nice) with something like some Heinie Gold Bead sights, I'd likely want to avoid the scuffs. Secondly, I think it would be nice to have a small cut out in the side of the sight pusher, just to one can get a slightly better view of the alignment when shimming the slide in place.Overall though, great little product! The instructions on ReadAvid's sight are easy to follow. Quick hint, you Glock 17, 19, 26 and 34 shooters just need to set the shoe orientation to "wide" and use the small shim. The tool is mostly metal, but the plastic grip is easy on the hands and it wasn't too hard to adjust the rear sight. It's a nice touch to get the 2 in one combo tool which stores in the adjustment handle. The bit for the front sight actually fits snug like you would expect it too, even better than the OEM Glock version IMHO. It's reasonably compact, so if you have a larger range bag (I use an old 5.11 backpack), this will be a nice addition to your range kit. This is also a nice gift option for the Glock owner in your life. Worth a try!

Looks like a nice tool, but there isnt any adjusting to get the correct clearances other than the shims they provide. Contacted the manufacturer after it damaged a sight when removing, following their user instructions, they told me the pusher wasn't far enough in the dovetail. There is no adjustment for that other than the two shims. Wouldnt recommend this tool if you plan on reusing the sight.

This tool makes pushing, moving or adjusting the rear sights a breeze; without marring the finish of your slide or destroying the rear sight. I had my old rear sight off and my new night sight back on and centered in less than three mins.If you own more than one Glock or plan on changing sights, this tool is a must.The hardest thing is figuring out how to get the spacers off that are not needed for any standards or compacts. you have to raise the silver foot thing up, enough to remove them, then put the slide in and tighten.The worst thing is the goofy tool that stores in the turning handle.Its a great idea, but a poor implementation. Its unscrews and comes in half, when you're trying to get the front sight screw out and you can't get enough torque on it, while keeping it on the tiny screw on the bottom inside of the slide. I finally had to grip the tool with Vice grips.If that tool wasn't such a pain, I'd have given this a 5 stars!!!Will use again to upgrade other sights...

This is a tool that does one thing and only one thing and it does that one thing exceptionally well.I’m not a “gun nut” and was able to figure out how to use this tool to change the sites on a Glock 42 in a few minutes.On thing I would ask the manufacturer is to find a way to eliminate the need for the two spacers. Otherwise, excellent tool that is easy to use.